| T O P I C R E V I E W |
| Kazerella |
Posted - 31/10/2008 : 18:58:31
I just wondered what everyone else keeps their rainbow boa in?
We had ours in a RUB which was good for the humidity, but didn't keep the temps up for some reason. Now she's in a viv so the temps are better, but it's harder to keep the humidity right. Plus mould keeps growing on the wooded bits.
Any suggestions?
www.thehognosesnake.co.uk |
| 15 L A T E S T R E P L I E S (Newest First) |
| Kazerella |
Posted - 27/04/2009 : 09:31:46
Glass tanks are better for humnidity, but the ceramic thing is an issue too. We are going to put Ruby on a ceramic, but we've got a glass tank with a wire mesh lid, so it will just be a matter of getting a lamp with a clip.
 |
| MissCat |
Posted - 23/04/2009 : 12:10:52
what is the exo terra glass vivs like for crb's? i'm keeping my baby in a rub til he grows a bit but i would eventually like to put him in a glass one when he is an adult. i still have Ra's old glass tank which i will put him into when he's med-adult sized. oo oo how do you fit a ceramic heater into a glass tank?
actually saying that i haven't even checked if ceramics are advised for crbs... i'll go do that :)
okay the care sheet says it's ok. so, for the tank, it's 3x2x2 size, top opening (slides out) i was considering converting it into a front opening viv by flipping it on it's sidegetting some glass cut to go along the bottom and top, then fitting door sliders and putting in glass doors. i may do that. either way, how on earth do you fit a ceramic bulb+ holder+guard into a glass tank? cables aren't a problem as the viv has vents that i could put the wires through. |
| Kazerella |
Posted - 26/01/2009 : 18:58:04
I've just surrounded my glass tank with wallpaper on 3 sides, so she has the security, but it's cheap as chips  |
| Ibson |
Posted - 26/01/2009 : 18:22:36
That's a good idea, I have just got an idea for my viv, I'm going to line the bottom with plastic sheeting this weekend so that it stops the water being absorbed into the wood at the bottom. |
| cmmercer |
Posted - 26/01/2009 : 10:40:46
Hmmm.... Am now thinking that having sold my fish tank which I think may have been an odd size for him anyway, that I will continue to build him an mdf viv, and then line it with perspex and seal that. More work I know, but I think it'll look nice and offer him the safety of being enclosed as mentioned above, but also be resistant to mold and easier to clean! |
| Ibson |
Posted - 25/01/2009 : 21:54:10
This is an interesting thread, as my new baby BRB is in a wooden viv and all tho it has been protected it is absorbing water and is slowly starting to warp and I'm thinking of now moving him/her into a tank. The viv is great tho as it blocks a lot of light out and he/she seems to feel nice and safe. |
| Kazerella |
Posted - 22/01/2009 : 09:52:05
Not sure really, but I think the yacht varnish is a better idea than untreated wood.
We now have our BRB in a glass tank and it's proving to be a lot better. |
| matty18714 |
Posted - 21/01/2009 : 21:07:59
I would use coated chipboard over MDF personally. MDF has a much higher chance of moulding. |
| cmmercer |
Posted - 21/01/2009 : 20:42:18
Hello I'm new here - got my BRB a couple of weeks ago. When you guys talk about moldy vivs, are they sealed with anything? I currently have mine in a rub, but in the long run the aim is to move him into a viv cos I'm struggling with temps/humidity. I build my own out of mdf, and figured that with plenty of good coats of yacht varnish (or similar) it should be fine at combating the mold problem. Does that sound like a fair statement to make? |
| karl |
Posted - 19/12/2008 : 20:58:20
quote:
Originally posted by Kazerella
I think the humidity is definitely more crucial than the temps.[/purple]
This follows on from a "discussion" I am having with someone else about BRBs. See he too is a believer of max humidity, over temperature, but I kinda think that temps should be lower, and mist once/twice a day to cause a high AND medium humidity (kinda like real life)
My humidity goes up to 91% (have a max min hygrometer) and min was 53%. Since my new regime (average 25degrees C) and misting twice I have noticed Bo ONLY lives on the hot side during low humidity, and moves to the cooler side during high humidity.
Its weird, and I always think people should do what they wanna do, and what works for them. It's kinda nice seeing different opinions/experiences. |
| Kazerella |
Posted - 17/12/2008 : 16:29:51
Ruby's viv averages at about 28-32 degrees, which I thought was a bit on the cool side, but she seems to like it. She's started eating again anyway.
I think the humidity is definitely more crucial than the temps. |
| karl |
Posted - 16/12/2008 : 22:13:16
I'm curious what temps others are using, as I have found high 70s very low 80s works very well (better ratings habits etc)
He has a "hot spot" but never goes near it, a breeder I spoke to also agrees lower temps are best for brbs |
| Kazerella |
Posted - 16/12/2008 : 17:54:23
I've just built up a viv with eco earth. Hopefully it'll work better than orchid bark. Seeming to get the humidity alright at the mo, but having to keep a good eye on the temps |
| karl |
Posted - 15/12/2008 : 23:50:52
TBH I just put loads of water into the viv (use eco earth as substrate) and it slowly evaporates under the ceramic. Seems to maintain a constant 60-80% and I have three moist hides in there (varying temp areas) so he can choose higher humidity if he wants.
I find LOTS of spag moss mixed into the substrate also helps |
| Kazerella |
Posted - 01/11/2008 : 16:41:12
Been on ebay looking for a suitable top, it's the wooden top bit that's the problem I think. It would be good just to buy the top because it'll be cheaper than buying a completely new viv. |
